sqwartHome

Join photo and signature

Stack your photo above your signature in a single JPG, at the size and KB limit your application asks for.

  • Free
  • No upload
  • No watermark
  • No sign-up
How it works

How to join photo and signature

  1. 1

    Choose your photo, then a photo or scan of your signature. Neither is uploaded.

  2. 2

    Crop the photo; the signature is cleaned up and trimmed automatically.

  3. 3

    Set the output width, the photo and signature heights, and the KB range from your form.

  4. 4

    Press Join photo and signature, then download the single JPG.

In detail

When a form wants one image

Some applications, including some state recruitment and university forms, ask for the photo and the signature in a single image rather than two files: the photo on top and the signature in a band underneath. This tool builds exactly that. It crops your photo to the shape you choose, cleans the signature (trims the empty paper, whitens it and darkens the ink), scales the signature to the width of the photo, and joins them on a white background with a thin gap.

Then it searches JPEG quality until the file is inside the KB range you type, padding the file with a hidden comment block if it must reach a minimum.

  • Starting layout: 300 pixels wide, photo 300 × 385 pixels (the 3.5 × 4.5 cm shape), signature band 115 pixels high. Change any of them.
  • KB range: type the minimum and maximum from your form's notice.
  • Format: JPG on a white background.

Check your form's rules

There is no single national standard for a joined photo and signature, so the size depends on the form. Read the image instructions in your notice and match the width, height and KB range. If the notice gives the size in cm, multiply by the DPI and divide by 2.54 to get pixels (3.5 cm at 200 DPI is 276 pixels).

If your form asks for separate files instead, use the exam photo and signature resizer. If it wants your name and the date printed under the photo, use the add name and date to photo tool.

Last verified: 12 November 2026. Rules change between exam cycles, so always compare with the notice for your own exam before you submit.

FAQ

Questions, answered.

Is my photo uploaded to your server?

No. The photo is read, cropped, resized and compressed inside your own browser. Nothing is sent to Sqwart or anyone else, so ID photos and signatures stay on your device. You can even switch off your internet after the page loads.

Can I put the signature beside the photo instead of below?

This tool stacks it below, which is what most forms ask for. If your form wants another layout, follow its sample.

My signature looks too thin in the joined image.

Make the signature band taller, or sign with a thicker pen. The clean-up step already darkens the ink.

Why does the checker say my file was padded?

Some portals reject files below a minimum size such as 10 or 20 KB. When a small image cannot reach that size even at the best JPEG quality, the tool adds a small hidden comment block inside the JPEG. The picture itself is unchanged; only the byte count goes up so the portal accepts it.

Does 1 KB mean 1000 or 1024 bytes here?

Portals differ, so the tool aims inside both readings: it keeps the file under the maximum counted as 1000 bytes per KB and above the minimum counted as 1024 bytes per KB. The checker shows the size in KB of 1024 bytes.

Does it work with HEIC photos from an iPhone?

Yes. HEIC photos are converted in your browser.

Keep going

More free exam & id forms tools