sqwartHome

Mic test

See your microphone's level live and record a short clip to hear how you sound.

  • Free
  • No upload
  • No watermark
  • No sign-up
How it works

How to use the mic test tool

  1. 1

    Click Start and allow microphone access.

  2. 2

    Pick your microphone and speak: watch the level meter and waveform.

  3. 3

    Record a clip (5 to 30 seconds) and play it back.

  4. 4

    Try echo cancellation and noise suppression on and off.

In detail

Reading the meter

The meter shows your level in decibels below full scale (dBFS), where 0 is the loudest a recording can go. Normal speech should peak around −12 to −6 dBFS. If it stays below about −30 dBFS you are too quiet: move closer or raise the input gain. If the peak hits 0 dBFS the sound clips and distorts: back off or lower the gain.

The peak reading holds the loudest moment so you can see whether a laugh or a plosive came close to clipping.

Echo cancellation and noise suppression

Browsers clean up microphone audio for calls by default: echo cancellation removes sound from your speakers, noise suppression reduces steady background noise like fans, and automatic gain evens out your volume. These help calls but can make voice recordings sound thin or watery. Record a clip with them on and off to hear the difference; for recording a voiceover, off often sounds more natural if your room is quiet.

If the mic doesn't work

  • Allow the microphone from the icon in the address bar, then reload.
  • macOS: System Settings > Privacy & Security > Microphone, turn on your browser.
  • Windows: Settings > Privacy & security > Microphone, and check the input device in Sound settings.
  • Check for a hardware mute switch on a headset or USB mic.
  • No sound in calls but the meter moves here: choose the same microphone by name in the call app's audio settings.
  • Nothing is uploaded: the level meter and test recording run entirely in your browser.
FAQ

Questions, answered.

Is my recording uploaded?

No. The test clip is kept in your browser tab and discarded when you leave the page.

What level should my mic be at?

Speech peaking around −12 to −6 dBFS is a safe level: loud enough, with room before clipping at 0.

Why does my recording sound different from what I hear?

Your own voice reaches you through your skull as well as the air, so recordings always sound a little higher and thinner. Processing like noise suppression changes it too.

Why is the meter flat?

The wrong microphone may be selected, it may be muted, or another app may be holding it. Pick another device from the list.

Can I test a Bluetooth headset mic?

Yes, if it shows in the list. Note that many Bluetooth headsets switch to a lower-quality mode while the mic is in use.

Keep going

More free creator tools