sqwartHome

Equalize audio with a 10-band EQ

Shape the sound of any file with a 10-band equalizer or a ready-made preset.

  • Free
  • No upload
  • No watermark
  • No sign-up
How it works

How to use the audio Equalizer tool

  1. 1

    Choose your audio files, or drop them on the box above.

  2. 2

    Pick a preset, or choose Custom and set each of the ten bands.

  3. 3

    Press Apply EQ.

  4. 4

    Download the equalized file.

In detail

The ten bands

  • 32 and 64 Hz: sub-bass and rumble. Cut them for voice; boost for weight in music.
  • 125 and 250 Hz: bass body and boominess. Too much sounds muddy, too little sounds thin.
  • 500 Hz and 1 kHz: the boxy, nasal midrange. A small cut often cleans up a room recording.
  • 2 and 4 kHz: presence and clarity. Where speech intelligibility lives; too much sounds harsh.
  • 8 and 16 kHz: air, sibilance and hiss. Boost for sparkle, cut to tame hiss or sharp S sounds.

The presets

Podcast voice cuts the low rumble a desk, a fan or handling noise adds, and lifts 2–4 kHz so words are clear. Vocal presence does a gentler version for music with singing. Bass cut fixes boomy recordings made close to a microphone. Treble boost brightens dull, muffled recordings. The loudness "smile" raises both ends of the spectrum, which makes music sound fuller at low listening volumes.

Each band is a peaking filter one octave wide, centered on the standard ISO frequencies. When bands are boosted the track is lowered first and a limiter at −1 dB catches peaks, so the result does not clip.

EQ tips

Cutting usually works better than boosting: rather than raising the treble to make a voice clearer, try lowering 250–500 Hz. Change bands by a few dB at a time. And EQ cannot remove noise that sits at the same frequencies as the voice; for steady hiss or hum, use Noise Reduction.

Formats

The result keeps the original's format unless you pick another, and several files can be processed with the same settings in one go.

FAQ

Questions, answered.

Is the equalizer free?

Yes. No sign-up, no watermark, no limits.

Which preset is best for a voice recording?

Podcast voice. It removes low rumble and adds clarity where speech is understood.

Can I hear the change before downloading?

Yes. The finished file plays on the page before you download it. Change the settings and run it again if you want more or less.

Will boosting bands make it distort?

No. The track is lowered before boosting and a limiter keeps peaks under −1 dB.

Are my files uploaded?

No. The EQ runs in your browser.

Keep going

More free audio tools