Normalize audio loudness
Set any recording to the loudness YouTube, Spotify or podcast apps expect, measured the way they measure it.
- Free
- No upload
- No watermark
- No sign-up
How to normalize audio loudness
- 1
Choose your audio files, or drop them on the box above.
- 2
Pick the target: −14 LUFS for YouTube and music streaming, −16 LUFS for podcasts.
- 3
Press Normalize. The tool measures the whole file first, then applies the right gain.
- 4
Download the normalized file.
What LUFS means
LUFS (Loudness Units relative to Full Scale) measure how loud audio sounds to people over its whole length, not just how high its peaks reach. The method comes from the ITU-R BS.1770 standard: it weights frequencies the way the ear does and ignores silent stretches. Every major platform measures loudness this way.
Peak normalization, which some tools offer, only raises a file until its single loudest peak touches the ceiling. Two files peak-normalized can still sound very different in loudness; two files normalized to the same LUFS sound about as loud as each other.
Which target to choose
- −14 LUFS: YouTube, Spotify, Tidal and TikTok all play music and video at about this level. Louder uploads are turned down, so mastering hotter gains nothing.
- −16 LUFS: the common recommendation for podcasts, and what Apple's Sound Check aims for. Speech at −16 is comfortable in earbuds and cars.
- −19 LUFS: a gentler level for audiobooks and quiet narration, mono speech in particular.
- −23 LUFS: the EBU R128 broadcast standard for European TV and radio (the US ATSC A/85 equivalent is −24 LKFS).
Two passes, one steady gain
The tool runs ffmpeg's loudnorm filter twice. The first pass measures the file's integrated loudness, true peak and loudness range. The second applies a single, steady gain so the whole file reaches the target, which keeps your dynamics exactly as they were. One-pass normalizers adjust the level continuously instead, which can pump or flatten music.
If reaching the target would push peaks above the true-peak ceiling (−1 dBTP by default), loudnorm limits just those peaks. Very quiet recordings with sharp peaks may therefore be gently compressed to get there. True peak counts the peaks between samples that appear after MP3 or AAC encoding, so −1 dBTP keeps the file from clipping on playback.
Questions, answered.
What LUFS should I use for YouTube?
−14 LUFS. YouTube turns louder videos down to about that level, so anything louder only loses dynamics.
What LUFS should a podcast be?
−16 LUFS integrated with peaks at or below −1 dBTP is the widely used target, and close to what Apple Podcasts recommends.
Is this the same as making it louder?
Not quite. Normalizing makes a file louder or quieter as needed to hit the target, measured as people hear it. The Volume Booster applies whatever gain you choose.
Will normalizing change the sound?
In most cases it only changes the level. A very quiet file with loud peaks may need its peaks limited to reach the target.
Can I normalize several files to the same loudness?
Yes. Add them all; each is measured and adjusted on its own, so they end up at the same loudness, ideal for an album or a series of episodes.
Are my files uploaded?
No. The measurement and processing run in your browser.
More free audio tools
- Volume BoosterMake quiet audio louder, or loud audio quieter, with a limiter that keeps it from crackling.
- Noise ReductionLower steady hiss, hum, fan and air-conditioner noise in voice recordings, right in your browser.
- Audio EqualizerShape the sound of any file with a 10-band equalizer or a ready-made preset.
- Trim AudioCut any audio file to the exact part you want, with an optional fade, right in your browser.
- Audio ConverterConvert any audio file to MP3, WAV, M4A, FLAC, OGG, OPUS or AIFF in your browser, with nothing uploaded.
- MP4 to MP3Turn MP4 files into MP3 in seconds. Free, no watermark, and your files never leave your device.